Download SELPHY CP1300 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Preserve working photo queues, ports, paper settings and other users' jobs.
- Follow the manufacturer’s instructions for power, USB, and network connections.
CP1300 is a photo printer
This dye-sublimation printer has a Mini-B computer port, a separate Type-A camera/flash-drive port, memory-card printing and 802.11b/g Wi-Fi. It is print-only; optional battery packs are separate. Match CP1300 on the label before choosing software or supplies.
Official package and connection checks
Rechecked 13 October 2026: the Canon Asia CP1300 package is V1.0, cp1300-100-10l.zip, 4.49 MB, updated 4 August 2026. It lists Windows 10 and Windows 10 (x64), including Korean language. This Windows package does not establish Windows 11, ARM, Linux or current macOS driver compatibility. The model manual describes AirPrint on Mac separately; it is not this Windows installer.
- Remove memory cards/flash drives before computer printing. Match the paper, ink cassette and paper cassette sizes.
- For Windows USB, choose the USB connection in the installer; at its connection prompt switch SELPHY off, connect directly with a Mini-B cable no longer than 2.5 m, then switch on as prompted.
- For router Wi-Fi, use the same reachable access point as the PC and choose wireless installation. Select the actual CP1300 queue and correct paper size.
Preserve other queues and jobs. Check the official terms and actual OS/CPU requirements yourself before installing. No driver binary, firmware update or physical print was tested here.
Two phone apps
Canon’s current app page requires a separate Canon PRINT app for Photo Layout printing on CP1300. Distinguish the two phone apps from the PC driver.
| Check | What to check |
|---|---|
| iOS / iPadOS | Photo Layout · App Store shows 4.4.0; Canon PRINT · App Store shows 4.0.0. Both listings require iOS/iPadOS 17.0 or later. Check publisher Canon Inc. and the actual device’s installation conditions. |
| Android | Photo Layout · Google Play lists Android 13, 14, 15, 16 and 17. Canon PRINT · Google Play did not expose a minimum Android version on the observed public page. Do not transfer one app’s requirement to the other; check both on the actual device. |
| Wi-Fi | App installation alone does not establish the wireless connection. Compare the CP1300 Wi-Fi guide. Canon PRINT’s shared scanning description does not add a scanner to this photo printer. |
App references checked 2026-11-02. PC package, hardware, media and display-error guidance retain their 2026-10-13 scope. For PC-only failure compare this CP1300 driver guide. App installation, connection and physical printing were not tested.
Compare a device-only photo with the PC job
Use a known supported photo on an SD/SDHC/SDXC card. Smaller cards require the proper adapter. The manual specifies Exif JPEG; edited files or images longer than 9600 pixels may fail. For a USB flash drive use FAT/exFAT and remove the memory card first.
- Load matching paper and ink, then insert the card in the pictured direction. Choose the photo, set one copy with the up/down buttons, preview with OK and press Print.
- Paper travelling in and out through the rear slot several times is normal. Wait until the finished print is ejected; do not pull it during the colour passes.
- If this photo fails, check the display, media and power. If it prints but the PC job fails, compare the queue, connection and same CP1300 driver. This is a photo comparison, not a hidden self-test or network report.
Six display conditions, without invented codes
| Display / situation | Meaning and first check | Details |
|---|---|---|
| Paper and ink do not match | Compare all three size labels: paper, paper cassette and ink cassette. The linked Canon issue also applies to the camera-side message. | Details |
| No ink / ink-end notice | Check the installed size combination first; replace an exhausted matching cassette. Some paper can remain after the ink ends. | Details |
| Paper-end notice | Once printing stops, refill the cassette without switching off; load at most 18 sheets. | Details |
| Antenna icon with red cross | The router connection is not confirmed; compare the actual access point and connection method. | Details |
| ID-photo screen instead of image list | Return Home and choose Select & Print; ID Photo Priority can change the startup screen. | Details |
| Too many Direct devices | This edition allows eight simultaneous Direct connections. Disconnect a connected device, clear the notice with OK and retry. | Details |
Eight printing causes and matching help
| Cause | First check | Matching help |
|---|---|---|
| Device-only photo also fails | Read the LCD and compare one supported photo with correctly loaded media. | Device-only photo |
| Wrong model, OS or driver | Device photo works but PC fails: compare the exact CP1300 package and actual OS. | Open this model driver guide |
| Wrong USB port or sleeping PC | Use the computer Mini-B port and direct cable, then wake the PC before unplugging. | USB checks |
| Wrong Wi-Fi or current address | Compare router mode versus Direct, the real SSID/IP and device reachability. | Wi-Fi checks |
| Card, flash drive or other source still active | Remove removable media for PC printing; finish the other device’s job/camera connection. | Job checks |
| Paper, ink or cassette size mismatch | Match all size labels, covers, quantity and application paper setting. | Paper and ink |
| Dust, reused paper or jams | Use fresh dedicated stock; compare quality and follow the exact jam procedure. | Quality and jams |
| Cooling pause or wrong layout | Allow thermal pauses; compare one-up/layout and host print settings. | Cooling and layout |
Match supplies before changing a driver
The manual pairs postcard sets such as KP-36IP, RP-54/RP-108 and KP-108IN with PCP-CP400; L-size KL-36IP uses PCPL-CP400, and card/label KC sets use PCC-CP400. Availability differs by region. SELPHY ES supplies are excluded. A matching ink cassette alone is not enough: check the loaded paper and paper cassette too.
Load at most 18 fresh sheets, glossy side up; remove protective sheets. Close the inner cassette cover and leave the outer cover open, then insert the cassette fully. Keep the printer level, at least 10 cm clear as shown at the sides/front and more than one paper length clear behind it. Do not pre-tear perforations or reuse a partially printed sheet.
Read actual Wi-Fi settings
On Home choose Wi-Fi settings → Confirm Settings to read the printer name/IP. A PC router connection uses Via Wi-Fi Network; Direct Connection is a separate camera/smartphone route. The manual specifies b/g, 2.4 GHz and channels 1–11. Compare the actual network/security/password, same access point, isolation and IP before changing software; do not copy an example address or weaken network protections.
Antenna icons alone do not prove the application can print. Finish other device jobs and remove cards/flash drives. The Direct eight-device limit is a connection limit, not an invented error number. Restarting disconnects other devices, so first try disconnecting the unnecessary connected device.
Use the computer port and correct queue
Mini-B is the PC port; Type-A is for a camera/flash drive. Compare the cable and this printer’s queue, and avoid a USB hub for the first check. If the PC slept while connected, wake it with the cable attached. The manual’s Mac procedure adds Canon SELPHY CP1300 to its printer list and uses AirPrint; current system UI and requirements need checking separately.
Cancellation, cooling and layout
For card printing the basic-print chapter uses Back to cancel. For a job sent by a smartphone, camera or PC, page 70 says to stop it on that sending device; Back on SELPHY does not cancel those jobs. Stop only your affected job and avoid removing media or unplugging during printing.
A thermal pause during continuous printing can be normal. Wait for cooling and keep the rear air vent clear; this edition gives no universal cooling countdown. If a single photo is reduced to one tile, compare Page Layout and one-up settings rather than treating it as a connection error.
Quality and jam recovery
Dust, moisture and reused sheets can affect quality. Use a soft dry cloth for the exterior; let condensation dry naturally. Remove the ink cassette before wiping dust from the vent. Do not introduce a different printer’s alcohol-cleaning recipe.
After printing has stopped, protruding jammed paper may be removed gently. If it resists, do not force it: follow page 71’s power-off/on ejection procedure, and ask Canon for service if it remains stuck. An accidental mid-print power loss requires restarting and waiting for ejection. A driver reinstall cannot free a mechanical jam.
Verified official sources
Checked 13 October 2026 against exact CP1300 support, Windows package and the mapped 85-page English guide, version 1.1 / CT0-D148-B. Eighteen selected pages were visually reviewed. The manual gives display guidance, not a universal numbered error-code list; record the full message on both printer and sending device.