Download the 5XL driver
DYMO Connect for Desktop 1.6.4 includes the print driver. Choose the Windows x64 installer for Windows 10 or later, or the Apple silicon installer for macOS 14 or later.
Get driver filesFor Windows ARM64, Windows x86 or an Intel Mac, check the matching option in DYMO’s operating system selector. Official DYMO operating system selector
Connect by USB or wired Ethernet
- USB Finish installing DYMO Connect before plugging USB into the computer. Turn on the printer, check the USB indicator and select the 5XL in the app. If it is missing on a Mac, check the macOS options for adding a printer.
- Wired LAN Connect the rear LAN port to an active network port and turn the printer on. Check the front LAN indicator. Install DYMO Connect on each computer that will print over the network, then choose Add Network Printer from the app’s File menu.
With both cables connected, DYMO Connect may show the same 5XL twice. Use the USB or LAN icon to choose the intended connection. If the LAN indicator is on and a Wi-Fi computer cannot see the 5XL, ask the network administrator to check whether that computer can reach the wired network.
Fix cropped or shifted 4 × 6 shipping labels
DYMO specifies a maximum print width of 105.73 mm and a maximum media width of 115 mm. Match the shipping app’s page size and orientation to the actual DYMO LW label stock. Print one simple label at the same size in DYMO Connect. If that works, check the shipping app’s queue and scale settings.
For skewed labels or repeated feeds, load the roll so labels come from underneath. Align the label’s left edge with the left edge of the exit slot. Seat the spool guide against the roll and adjust the exit guide to the label’s right edge.
Read the power indicator and run a self-test
| Power indicator | What to check |
|---|---|
| Off | The printer is off. Check the supplied adapter and outlet. |
| Steady | The printer is ready. Check that the computer is using the intended connection. |
| Dim | The printer is in power-saving mode. |
| Flashing quickly | Check for an empty roll or unrecognized labels. If the print head has overheated, switch off for 3–5 minutes. For a system error, turn the printer off and back on. Contact DYMO if flashing persists. |
- Load a roll. Hold the power and forward-feed buttons together for at least ten seconds.
- Release both buttons when the pattern prints. Briefly press the power button to stop.
If a label is physically jammed, tear off any labels that have already exited, push the release lever forward and gently pull the jammed label from the exit slot.
If the self-test works but computer jobs fail, check the selected USB or LAN entry and the pending jobs. If the Windows print driver is missing, check the appropriate package under 5XL driver downloads.