Honeywell PC45T driver download and ribbon error guide

2026-11-17Honeywell

Find the Windows InterDriver package

Open Honeywell software downloads

Honeywell requires an account and its Software Download Manager to download software. In the official portal, open Software → Printers → Printer Drivers and look for the Windows print driver. The support article points to Windows Print Driver → Current. The PC45 manual refers to the package as Honeywell Windows Driver.

Install the print driver even if Windows detects the printer over USB. Before installing, check the package’s OS and CPU requirements and the resolution on your PC45T. Firmware runs on the printer, and PrintSet is for configuring it.

Identify the PC45T and its ports

The PC45T uses ribbon for thermal transfer. The PC45D is the direct thermal model in the same series. Use the rear USB Device port for a cable to your computer. USB Host is for peripherals such as scanners or storage. Use Ethernet for a wired network, and check the installed options for Wi-Fi, Bluetooth and RS-232.

What to check when labels do not print

Ribbon loading and the on-screen alerts

Choose a ribbon that matches your label stock. Follow the manual diagram to fit the supply roll in the rear holder and the empty take-up core in front. Attach the ribbon to the core, take up slack with the wheel, and set the ribbon selector to Ink-in or Ink-out to match the roll. Close the cover, then save Ribbon (TTR) under Settings → Printing → Media → Print Method.

  • Out of Ribbon. Check for a ribbon and reload it.
  • Ribbon Installed. The printer is set to direct thermal while a ribbon is fitted. Choose Ribbon (TTR) for thermal transfer media, or remove the ribbon and use the direct thermal setting for direct thermal stock.
  • Out of Media. Load a label roll and thread it through the media guides.
  • Printhead Lifted. Lower the head and check that the print mechanism is closed.

Print a test label without the computer

With media and ribbon loaded, open the main menu from the Ready screen and choose a label under Tools → Test Labels. If that label is faint, open Wizards → Printing → Print Quality and adjust for the media and ribbon.

If the test label prints but computer jobs fail, compare the queue’s USB port or IP address with the actual connection as a general check. See the PC45T driver installation guide if the queue needs the correct driver.

Official references

Exact PC45T product and Resources tab · Official software downloads · PC45 series user guide · InterDriver model support and download folder