Brother HL-L2350DW driver download, Test Print and TS Wi-Fi errors

Use the manufacturer's support page to confirm the exact model and operating-system version before downloading.

Official manufacturer page

Download HL-L2350DW driver

ModelHL-L2350DW
ManufacturerBrother
Product typeMonochrome laser printer; print only
Operating systems to checkWindows, macOS
Before you install
  • Match the full model number on the device label, including suffixes.
  • Check your operating-system version and architecture on the official support page.
  • Inspect the failed job for this printer before replacing its driver; preserve unrelated jobs.
  • Follow the manufacturer’s instructions for power, USB, and network connections.

HL-L2350DW: monochrome laser with automatic duplex

This is a print-only monochrome laser printer, with automatic two-sided printing, Hi-Speed USB 2.0, 802.11b/g/n router Wi-Fi, Wi-Fi Direct and AirPrint. It has no Ethernet port, document scanner or fax. The USB cable limit in the mapped UK manual is 2 metres. Shared iPrint&Scan software names do not add scanning hardware. The US product page marks sales discontinued; the exact model support and manual pages remain available.

Choose the actual OS on the official download page

With Windows 11 selected on 13 October 2026, Brother lists Full Driver & Software Package L1 (221.76 MB, 6 August 2026) and Printer Driver 1.12.0.0 (30.16 MB, 12 August 2026). XPS Printer Driver 1.11.0.0 (28 November 2024) is a separate choice. Compare the selected package requirements and configuration notes with your OS, CPU and connection before installation.

With macOS 26.x selected, the page lists Full Software Package 1.0.0 (246.56 MB, 29 September 2026). Its Printer Driver Information recommends AirPrint. The software package and wireless setup utility are distinct from a standalone printer driver; select the intended AirPrint queue. These observations do not establish Windows ARM, current Linux CPU support or successful installation on every Mac. Firmware is a separate update.

  1. Match HL-L2350DW on the physical label and select the actual OS version on the model page.
  2. Use that package’s USB or wireless setup sequence. Keep administrator-approved security settings and read its prerequisites.
  3. Select the HL-L2350DW queue, then compare its USB connection or current wireless address.
  4. Compare one small PC document with the device Test Print below. Check duplex separately with the correct paper.

Print from the device before changing PC software

HL-L2350DW has an LCD, arrow buttons, OK and Go. Use the arrows to select Printer → OK → Test Print → Go. This prints the device quality test. The additional Print Options step in the shared manual belongs to HL-L2370DN/HL-L2375DW.

For the settings list, use Print Reports → OK → Printer Settings → OK → Go. Pressing Go three times is the HL-L2310D procedure. A working device page with a failed PC job points you toward the selected queue, connection and HL-L2350DW driver; it does not by itself prove that the Wi-Fi path works.

Eight LCD condition checks

LCD messageMeaning / first checkDetails
Cover is OpenThe front cover or rear fuser cover is not fully closed. Let hot parts cool before handling the rear area.Details
2-sided DisabledThe back cover is open or the two-sided tray is not fully inserted.Details
Manual FeedThe PC selected the manual source, but the manual slot has no paper.Details
Media MismatchThe driver media type differs from the printer Paper Type setting.Details
Size Error DXThe selected/loaded size is unsuitable for automatic duplex; check the regional paper specification.Details
No Paper / No Paper T1Paper is missing, badly loaded, or has failed to feed from the indicated tray.Details
Drum !The corona wire needs cleaning, or the toner/drum assembly is not seated correctly.Details
Toner Low / Replace TonerLow still allows printing; Replace Toner indicates the cartridge end of life and printing stops.Details

Seven wireless report codes

WLAN codeHL-L2350DW meaningDetails
TS-01Wireless is not enabled. Check the model WLAN setting; HL-L2350DW has no Ethernet cable to remove.Wireless details
TS-02Router cannot be detected. Check the intended 2.4 GHz SSID, security details and permitted MAC address; a 5 GHz-only SSID is unsuitable.Wireless details
TS-04Router authentication/encryption is unsupported. Choose an administrator-approved protected network compatible with the printer.Wireless details
TS-05SSID or network key is incorrect. Re-enter the actual network details.Wireless details
TS-06Authentication method, encryption method or network key is incorrect. This edition does not define TS-06 as WPS detection.Wireless details
TS-07A WPS-enabled access point cannot be detected. Check the intended router and both devices’ WPS setup procedure.Wireless details
TS-08Multiple WPS-enabled access points were detected. Use only the intended setup session and retry later if necessary.Wireless details

Eight printing causes and matching help

CauseFirst checkMatching help
Device Test Print also failsRead the LCD and check paper, covers and supplies before changing PC software.Device Test Print
Wrong driver, model or OSDevice printing works but the PC job fails: match HL-L2350DW, the chosen OS and the queue.Open this model driver guide
USB cable or queueCompare a direct USB data connection, cable up to 2 m and the selected queue.USB checks
Wireless address changedCompare the current Network Config report with the PC queue port.Network reports
Wrong SSID or wireless securityUse the WLAN report’s actual TS code, intended 2.4 GHz network and approved security.TS error checks
Paused or failed jobInspect this printer’s failed job and pause/offline status; preserve other queues.Queue checks
Paper source or duplex mismatchMatch the actual stock, source and printer/driver size and type.Paper and duplex
Stripes, toner or Drum !Compare the device Test Print, exact supply message and corona-slider position.Quality and supplies

USB checks for this model

Use a USB 2.0 data cable no longer than 2 m and compare a direct PC port with the actual printer queue. Follow the chosen installer’s cable instructions. An Ethernet setup recipe from HL-L2370DN/HL-L2375DW does not apply to this hardware.

Read the actual Network Config and WLAN reports

Use Print Reports → OK → Network Config → OK → Go. Read the actual IP address, subnet and MAC information. If the IP is 0.0.0.0, wait one minute and print again. Compare the current address with the queue port; do not copy the manual’s example IP.

Use Print Reports → OK → WLAN Report → OK → Go for wireless status and the applicable TS code. These reports serve different purposes from the device quality Test Print. Redact private network information before sharing.

Router connection and Wi-Fi Direct

For router setup, the manual route is Network → OK → WLAN → OK → Setup Wizard → OK, followed by enabling WLAN and selecting the intended SSID. Enter that network’s actual key and follow the LCD confirmations. Router Wi-Fi uses 2.4 GHz; Wi-Fi Direct is a separate peer connection. A Direct connection does not prove that the printer joined the office router.

The older TS-04 table includes legacy open/WEP examples. Use a compatible protected network approved by its administrator; do not weaken a shared router to clear the error. This manual lists TS-01, TS-02 and TS-04 through TS-08, with no TS-03 entry.

Cancel only the affected job

Inspect pause/offline and the first failed HL-L2350DW job on the sending device. Holding Go for about two seconds cancels a print job; it is not a report or factory-reset command. Retry a small document after resolving the cause. Preserve unrelated jobs and printers.

Separate manual-feed paper from duplex paper

The mapped UK manual specifies automatic duplex with A4 plain, thin or recycled paper, 60–105 g/m². The tray range is 60–163 g/m²; the manual slot accepts one sheet at a time, 60–230 g/m², including supported label/envelope types. Those broader ranges do not extend duplex support. Check the local edition and actual stock before choosing paper; laser-compatible label support does not make this a label-only printer.

Match Paper Type, Paper Size and the PC source with the loaded paper. For Manual Feed, load one sheet in the manual slot or select the intended tray. For jams, follow the exact Jam Tray 1, Jam Rear, Jam Inside or Jam 2-sided diagram. The Rear/Inside procedures first leave the printer powered on for 10 minutes so the fan can cool hot parts. Wait for safe cooling, then remove fragments gently as shown; do not force inaccessible paper or touch the hot fuser.

Drum !, stripes and toner are separate checks

For corona-wire cleaning, gently move the green tab back and forth several times, then return it to the Home position with the arrows aligned. Leaving it away from Home can cause a vertical stripe. Reseat the toner/drum assembly according to the diagram. Toner Low can still print; Replace Toner stops printing. Reset a drum counter only when installing a real new drum under its instructions.

If the LCD shows Print Unable ##, record the actual full message and seek the model’s service guidance if it persists. The ## placeholder is not an invented numeric fault definition.

Verified official sources

Verified 13 October 2026 against the exact product, selected Windows 11/macOS 26.x downloads and the UK model’s Online User’s Guide PDF, listed 18 March 2021 (C). It has 249 PDF pages; 19 relevant pages were visually reviewed. Printed page numbers are four less than PDF page numbers. Regional paper rules and newer menus can differ.