Official CL-S631II driver download
Confirm that the model filter reads CL-S631II. For Windows 10 or 11, select Windows Driver. macOS and Linux have separate CUPS entries. VCOM provides a virtual COM port and Label Printer Utility manages settings. Check the manufacturer’s listing for your operating system.
Check the 300 dpi model and fitted ports
The CL-S631II supports 300 dpi direct thermal and thermal transfer printing. USB and RS-232C are standard. Ethernet, wireless LAN and parallel interfaces are optional. Verify the fitted connection before setting up a network queue. In the label application, match the printer resolution and the stock’s width and length.
Run an internal FEED test
- For gap labels, hold FEED while switching on and release it when PRINT flashes slowly. The printer advances the stock and prints two test labels.
- For continuous media, keep holding FEED until PRINT flashes rapidly, then release it. Switch the printer off and back on after the test to resume normal printing.
Check ribbon wrinkles and slippage
Thermal transfer printing requires ribbon. If diagonal lines also appear on the internal test, check that the ribbon winds evenly. The manual’s starting tensions are strong for 4-inch ribbon, medium for 3-inch and weak for 2-inch.
For diagonal wrinkles, increase the tension and run another test. For slippage that leaves film residue on the stock, reduce the tension and test again. Page 55 shows the front winding and rear supply tension knobs.
If only one side is slack, check the left-to-right balance separately. The manual directs you to identify the loose side near the supply roll, adjust the front balance knob first and run a test. Use the diagram on page 56 to choose the direction.
Read the ribbon indicators
With PRINT off, fast CONDITION and ERROR flashes in sync indicate a ribbon feed error. Alternating flashes indicate ribbon end. Check the ribbon path and its attachment to the take-up core for a feed error. Fit a new ribbon at ribbon end.
If the internal test works and only computer jobs fail, verify the queue model, port and label size, then check the driver for this model. CL-S631II driver guide