This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download DS40 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the dye-sublimation roll-paper/ribbon photo print-only printer, usb 2.0. the official ds40/ds80 manual separates ds40 high-speed 300x300 and high-quality 300x600 dpi. do not import ds80 eight-inch media, scanner functions or built-in ethernet/wi-fi. model DNP DS40. The download button opens the official DNP support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: The official DNP Europe DS40 list provides a dedicated Windows 11 ZIP. Its English readme states DS40 V3.4.1.0; English/11/ReadMe_Install.txt specifies DriverInstall.CMD. Windows 10/8/7/Vista/XP/2000 are separate legacy entries, not this package's compatibility. The DS40 Mac link is 5.2.7 for macOS 11-15; its actual ZIP contains Packages/DNP Photo Printer Driver-5.2.7(669)_EU.pkg and a separate UNINSTALLER PKG. No Windows ARM/Server, macOS 26, Linux or native CPU support is inferred. Legacy availability is not OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Confirm exact model, real OS/CPU and rights, rated grounded power, USB data cable and matching DS40 paper/ribbon set. Preserve queues/jobs/media settings. Fit the scrap box and close the cover. Review actual terms yourself; no routine firmware update, factory reset or security disabling.
- Windows 11: extract the official model ZIP and follow English/11/ReadMe_Install.txt for DriverInstall.CMD. Verify source and OS before running it. Follow current installer connection prompts; do not automatically apply old unsigned-driver bypass instructions or reinstall a working driver.
- Hardware USB: the manual's printed page 16 connects the cable while printer and computer are powered off, then powers on. Finish jobs and shut down safely; reconcile with current package prompts. Select the actual DS40 queue/USB port, match media and test a small photo job. Never disconnect or power off during printing.
- Compatible Mac: extract the official ZIP and install the Driver PKG under Packages, not the separate uninstaller. Follow actual installer instructions, safely connect USB, check the real device/software/media under printer settings and test. USB-only hardware does not provide a native printer-IP or Wi-Fi setup. Separate servers need their own verified model/compatibility/instructions.
DS40 paper, ribbon and power-loss recovery
Checked 25 October 2026 against printed pp.23–28 (PDF pp.24–29) of the official shared DS40/DS80 manual. These recovery sections apply to DS40. The US listing and filename say Ver.1.18, while the downloaded cover says Version 1.17. Earlier EU Ver1.02 and package verification dates remain unchanged; no installer or physical printer was tested in this update.
Paper jam: remove the partly printed area
- Keep power on during printing. If power was already lost, use the power-loss branch below before opening. Once the mechanism can be opened normally, pull it out and remove the ribbon cassette.
- Gently draw remaining paper upward as illustrated in the manual and cut away wrinkled or partly printed areas with a straight scissor cut. Force can damage the printer.
- Remove the scrap box and rewind the roll.
- Trim any remaining partly printed, creased or damaged section squarely, then reload using the media-loading procedure. Printing over an existing image can stick the ribbon to the paper and cause another jam.
Official jam diagrams: printed pp.25–26
Ribbon trapped in the mechanism
- The trapped-ribbon procedure on printed p.27 first separates the trapped ribbon by cutting it.
- Carefully remove ribbon fragments from the mechanism; remnants can affect print quality.
- Rejoin the ribbon using cellophane or similar tape as illustrated.
- Turn the take-up ribbon several times until the taped joint is out of sight and the ribbon is taut, then continue with the paper-jam procedure.
Official ribbon recovery: printed p.27
Power loss and interrupted cutting
| Event | Manual action |
|---|---|
| Power loss | Power loss during printing can lock the mechanism closed. Restore power so the partial print is cut into scrap-size pieces and ejected. Then open the mechanism, check for remaining prints and use the paper-jam procedure if needed. |
| Cut stop | The guide starts by switching power back on to release the paper and return the cutter to its ready position, then removing partly printed material. Do not push the blade by hand or force the mechanism; contact service if the paper cannot be released. |
Official power/cutter recovery: printed p.28 · DS40 failure checks
Do not create a power interruption as a recovery test. If device errors clear and USB works but computer printing still fails, compare model, OS and files in the same DS40 driver guide.
Indent marks and dirty photo backs: check the platen roller
| Symptom | What to check |
|---|---|
| Repeated indent marks / dirty white back | The manual points to platen cleaning for these symptoms. Dust, grime or adhesive from paper/ribbon can collect on the roller. |
| Jam / trapped ribbon / power loss | Use the existing recovery procedure first; do not force a locked mechanism open for cleaning. Paper recovery · Power loss |
| Computer-only failure | As common PC checks, compare the USB queue, cable, actual OS and package. Roller care does not replace driver setup. DS40 drivers |
Common preparation: Finish printing, switch off, unplug and let hot parts cool. The manual prohibits opening the cover during printing, internal disassembly and spraying liquids inside. The following two items are the cleaning chapter’s actual procedure.
- Prepare gauze or another soft cloth moistened with ethyl alcohol. Avoid benzene and thinners, which can damage the resin.
- Wipe the pictured platen roller while turning it. Take care around the printer’s edges; do not extend this into internal disassembly or adjustment.
As a common follow-up, let the cleaned area dry, restore supplies using the manual and check output. This section gives no alcohol concentration, fixed drying time or cleaning schedule. Do not transfer another model’s 50 mm repeat interval or monthly cadence to DS40. If marks persist, provide samples and operating conditions to service.
Checked 26 October 2026: printed p.29/PDF p.30 of the shared DS40/DS80 manual. The filename says Ver.1.18 while the cover says Version 1.17. This is platen care, not a head-cleaning/replacement procedure. Earlier recovery/OS/driver verification dates remain unchanged; no physical cleaning or printing was tested.
DNP DS40 not printing: check possible causes
Separate DS40 paper, ribbon, closure and cooling states from USB or driver problems on the computer. Common host checks below are not device-specific error codes.
| Cause | First checks |
|---|---|
| Paper jam | Paper Error or recurring jams: check for partly printed or wrinkled paper. See steps |
| Ribbon | Ribbon Error: check trapped ribbon, fragments and slack. See steps |
| Power | After power loss during printing, restore power as documented before opening a locked mechanism. See steps |
| Media end | Paper End / Ribbon End require the documented paper-and-ribbon set replacement. See steps |
| Cover / box | Door is Open / No Scrap Box: check closure, paper loading and the scrap box. See steps |
| Cooling | Head Cool Down is an automatic recovery state; reinstalling a driver does not replace cooling. See steps |
| USB / queue | Common host checks: actual DS40 USB queue, cable, first failed job and pause state; do not assume a printer IP or device-only test. See steps |
| Driver / OS | Common host checks: if the printer is ready and USB works, compare the DS40 model, actual OS/CPU and selected package. See steps |