DNP DS80 Driver Download and Installation Guide

Use the manufacturer's support page to confirm the exact model and operating-system version before downloading.

This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.

Official manufacturer page

Download DS80 driver

ModelDS80
ManufacturerDNP
Product typeUSB 2.0 dye-sublimation roll-media photo print-only printer, verified 8x10/8x12 media. Not DS80DX or DS820A, not a scanner/MFP. No verified built-in Ethernet or Wi-Fi. DS40 holders/cassettes/scrap box are not interchangeable.
Operating systems to checkExact DS80 official downloads verified 7 October 2026. Windows11-only 3.1.3.0 package INF explicitly targets Windows 11 x64 and DS80. Do not use on Windows 7/8/10. Separate Windows 10 Compatible 32/64-bit download has DS80 x86/x64 components and 3.1.1.0 INF; Nov22 is not a version or asserted publication date. Its ReadMe_Install.txt states certificate validity November 2022-November 2025. This alone does not establish present signature validity or successful installation; do not bypass signature/security warnings or disable verification. Ask DNP for the current approved package when a warning appears. No inferred macOS/Linux/ARM/Server support from these Windows files. Check exact model/OS/CPU official files separately; legacy availability does not promise OS security support.
Before you install
  • Match the full model number on the device label, including suffixes.
  • Check your operating-system version and architecture on the official support page.
  • Cancel pending print jobs before replacing an existing driver.
  • Follow the manufacturer’s instructions for power, USB, and network connections.

Model and driver source

This guide is for the usb 2.0 dye-sublimation roll-media photo print-only printer, verified 8x10/8x12 media. not ds80dx or ds820a, not a scanner/mfp. no verified built-in ethernet or wi-fi. ds40 holders/cassettes/scrap box are not interchangeable. model DNP DS80. The download button opens the official DNP support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.

Operating-system and download checks

The Korean catalog lists these systems for checking: Exact DS80 official downloads verified 7 October 2026. Windows11-only 3.1.3.0 package INF explicitly targets Windows 11 x64 and DS80. Do not use on Windows 7/8/10. Separate Windows 10 Compatible 32/64-bit download has DS80 x86/x64 components and 3.1.1.0 INF; Nov22 is not a version or asserted publication date. Its ReadMe_Install.txt states certificate validity November 2022-November 2025. This alone does not establish present signature validity or successful installation; do not bypass signature/security warnings or disable verification. Ask DNP for the current approved package when a warning appears. No inferred macOS/Linux/ARM/Server support from these Windows files. Check exact model/OS/CPU official files separately; legacy availability does not promise OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.

Connection and installation

  1. Check exact DS80, OS/CPU, installation rights, shielded USB cable and matching photo paper/ribbon. Preserve queues/jobs/colour settings and coordinate shared changes. Use rated grounded power, provided cord and clear ventilation. Read actual terms; no default firmware update, reset or security weakening.
  2. Follow the DS80 media column in the DS40/80 manual: install matching paper/ribbon as a set, straight paper path, correct cassettes, no ribbon slack, fitted scrap box and locked mechanism. Do not interchange DS40 parts.
  3. The hardware manual connects USB with PC and printer off, then powers on. Switch off before USB connection/disconnection, but never interrupt active printing. Download/extract the exact OS package and follow its current prompts. Windows 11 ReadMe_Install.txt starts package installation through its provided DriverInstall.CMD. Other model files or legacy screenshots are not a substitute for current instructions.
  4. Select real DS80 queue and USB port, match installed 8x10/8x12 media and photo job settings, then test a small job. Do not mass-delete working queues.
  5. USB-only hardware: no invented Ethernet IP or Wi-Fi SSID menus. External print servers or separate sharing systems need separately verified DS80 compatibility and administrator settings, not generic built-in network instructions.

DS80 media loading and initialization

Checked 28 October 2026 against the DS80 column and printed pp.17–24 (PDF pp.18–25) of the official shared DS40/DS80 manual. The listing and filename say Ver.1.18, but the actual cover says Version 1.17. Earlier Windows package, signature and OS findings retain their 7 October verification date.

ItemCheck
Paper / ribbonThe DS80 column lists 8×10 and 8×12 inches, 203mm paper and 210mm ribbon. Photo size and consumable width are different measurements.
Specific partsThe paper holder, paper cassette, ribbon cassette and scrap box are model-specific. A shared manual does not make DS40 and DS80 parts interchangeable.
Output trayPrinted p.23 excludes DS80 from the L/PC Paper Tray. That DS40 output-tray illustration is not a required DS80 fitting step. The scrap box is a separate required part.

Six media-loading checks

These checks group the manual’s loading sequence. Avoid hot parts, gears and the cutter; keep the cover closed during printing and follow the original diagrams for direction.

  1. With printing stopped, open the mechanism normally using the Open Lever, then open the Paper Release Lever. Lift the scrap box straight up by its centre and remove the paper cassette. Do not tilt the box or force a locked mechanism.
  2. Check for gaps at the holder and uneven roll ends. Remove and flatten an uneven roll end, then seat the holder fully in the cassette in the illustrated direction.
  3. Remove the securing tape and align the paper with the guide, extending it about 5mm beyond the roller. Follow the DS80 8inch mark and diagram. Skewed loading can cause edge white lines, ribbon wrinkles and registration slippage.
  4. Refit the paper cassette and turn the roll in the illustrated direction until the buzzer sounds and the orange flashing indicator goes out. Do not invent a turn count or feed distance.
  5. Empty the scraps when replacing paper and ribbon, refit the scrap box and close its cover. The printer will not operate without the box and reports No Scrap Box. Keep fingers away from the cutter above it.
  6. Fit the new ribbon into its cassette, wind slack in the arrow direction and install it with the Supply side in front before closing the mechanism. Replace paper and ribbon as a matched set with the ribbon IC information; do not bypass the chip.

Original loading diagrams: PDF pp.19–23

Four blank initialization sheets and a photo test

Printed p.22 describes four blank sheets being fed out when the loaded mechanism closes, removing the dirty outer layer of paper. It also says initialization is skipped if power is turned on after paper is set. Do not substitute another DNP model’s three- or five-sheet procedure.

Blank initialization does not prove photo-data printing, USB detection or head condition. Once the printer is ready and device errors clear, a common host check is a small photo job using the actual DS80 USB queue and loaded media size. No standalone test-print button was established here. If only computer printing fails, use the same DS80 driver and OS guide.

Compare the complete indicator pattern

ItemCheck
Scrap boxNo Scrap Box calls for checking box fitting and detection. It can share steady POWER and flashing ERROR with an open door, so inspect the box and closure together.
SizeThe separate indicator guide, PDF p.2, describes alternating RIBBON/PAPER flashes for a mismatch between the ribbon media and sent job. Match loaded media and photo-job size; this is not a numeric error code.
Steady ERRORThe separate guide uses steady POWER/ERROR for both cutter-jam and system-error entries. Record whether it persists from power-on or began during cutting. Do not move the blade by hand or dismantle the printer; seek support if it cannot be released.

The manual’s printed p.24 and the 2017 indicator guide’s p.2 show different patterns for the door-open rows with and without paper. Keep that discrepancy visible rather than combining them into a unique LED code map. Record all four lamps, steady/flashing states and the job context, then check paper, closure and the scrap box.

Shared-manual indicator table · Separate indicator guide, p.2

This update compares official documents; it did not run an installer, update firmware or test a physical printer.

DNP DS80 not printing: check possible causes

Separate DS80 media, loading, initialization and scrap-box states from host queue, USB and driver problems. Common host checks are not device error codes.

ItemCheck
MediaCheck DS80 203mm paper, 210mm ribbon, 8×10/8×12 sizes and matched-set replacement. Media sizes
LoadingCheck holder gaps, alignment, the approximately 5mm leader, buzzer and ribbon slack in sequence. Loading checks
Box / coverInspect the actual scrap box and closure; one LED pattern alone is not a unique diagnosis. Indicator limits
Blank sheetsSeparate four-sheet media initialization from a computer photo test. Initialization
CoolingHead Cool Down recovers automatically. Keep vents clear and do not touch hot parts. Official states
Fault staysUse the documented media recovery for Paper Error or Ribbon Error. Seek support for a persistent cutter/system error rather than forcing parts. Record states
Host queueCommon host checks: actual DS80 USB queue, cable, first failed job and pause state; do not assume a printer IP address or standalone test button. Queue checks
Driver / OSCommon host checks: if the device is ready and USB works but host printing fails, compare DS80 file, OS, CPU and signature requirements. Same DS80 driver

Find another model or symptom →