Mac software checked 16 October 2026; device and LCD guide checked 14 October 2026. Older Windows and Linux package evidence retains its earlier scope.
The diagnostic section below was checked directly against the exact model’s official guide. Confirm current software compatibility in the manufacturer’s download listing.
Download HL-L2370DW driver
Phone iPrint&Scan and file sharing
The exact-model manual chapter lists HL-L2370DW for phone printing with Brother iPrint&Scan. Distinguish its installation target from the computer driver. Shared app descriptions of scanning or faxing do not add those features to this print-only model.
| Check | What to check |
|---|---|
| iOS / iPadOS | iPrint&Scan · App Store shows version 6.15.5 and requires iOS/iPadOS 15.0 or later. Check publisher Brother Industries, LTD. and installation conditions on the actual device. |
| Android | iPrint&Scan · Google Play did not expose a minimum Android version in the observed public listing. Check installation conditions in the official listing on the actual Android device. |
| Sharing | Current Android notice says in-app cloud-service login is temporarily suspended while printing through the sharing feature remains available. As a general comparison check, compare file-sharing printing from another app when only cloud login fails. |
| Wi-Fi | The store descriptions use a local wireless network to connect phone and printer. Compare the model-specific mobile FAQ and the existing WLAN-report guide with the actual connection. |
App references checked 2026-11-02. Earlier dates and scope for Windows ARM, Mac packages, hardware, paper and display messages remain unchanged. If all printing fails, compare this HL-L2370DW device Test Print guide. App installation, login, connection and physical printing were not tested.
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the a4 monochrome laser print-only device with automatic duplex, usb, ethernet and wlan. us product sales are discontinued, not driver availability. manual lists up to 34 a4 or 36 letter pages per minute. hl-l2370dw(xl) is one support grouping, not a separate search-intent article. iprint&scan does not add scanner hardware. model Brother HL-L2370DW. The download button opens the official Brother support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
Earlier US/English download verification recorded the following Windows 11 list: Full Driver & Software Package L1, 6 August 2026, 221.76MB. Printer Driver detail: 1.12.0.0, 12 August 2026, 30.16MB; compatible HL-L2370DW(XL); Windows 11, Windows 10 32/64-bit, Server 2025/2022/2019/2016. Do not add legacy menu OS to that package; the current Windows ARM web guidance is distinguished below. Administrator login required. Mac listings checked 16 October 2026 recommend AirPrint and also offer Full Software Package 1.0.0 (manufacturer Supported OS 27/26/15; CPU and runtime unverified). Actual Linux deb list: printer driver 4.0.0-1, 2 November 2017, 0.12MB; Driver Install Tool 2.2.6-0, 24 September 2025. Distribution/CPU/CUPS conditions require checking; rpm menu is not verification of a particular rpm file. No EULA was accepted or software run. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
HL-L2370DW on Windows 11 ARM: software status and basic printing
Checked 17 October 2026: Brother’s two ARM pages describe different support scopes. Read the exact HL-L2370DW(XL) row and its notes rather than treating every Windows 11 download as the same processor package.
- Brother software status: the Windows 11 Arm support statement marks this model Checking with note 2 and no model download link. That page says compatible Brother software varies by model. This is not confirmation that the previously listed 64-bit Printer Driver or full package is a tested native ARM64 installer.
- A separate basic print route: Using a Windows computer with an ARM processor lists the same model as Available. Note 2 from the software statement links to FAQ00100863, whose displayed date is 02/05/2026. Its Windows 11 network route uses Settings → Bluetooth & devices → Printers & scanners → Add device, then adds the detected machine. This describes Windows printer addition; it is separate from installing a Brother software bundle.
- USB and device features remain separate: the general ARM guide also describes connecting the USB cable. The Windows 11 Arm statement says Brother iPrint&Scan / scanner-driver use is unavailable over USB. HL-L2370DW is the previously verified print-only model; the generic FAQ’s wording about printing or scanning does not give it scanner hardware. Available is not a test of every Windows build, application or printer feature.
If an ARM Windows computer cannot print
- Common host check: record the actual Windows version and processor type, model label, selected queue and connection. Use the HL-L2370DW driver download guide and the ARM-specific notes. A generic 64-bit label alone does not identify ARM64 software support.
- For the documented network route, confirm the printer is already on the network and compare the detected model in Windows before adding it. Use the existing Test Print / report guide to distinguish a device problem from a computer job. The ARM FAQ is not an instruction to reset network settings or replace a working queue.
- If the device prints its own test but an application fails, preserve the queue, port and job error before changing software. Compare the same-model cause checks. Checking and Available concern different scopes here; neither proves a hardware fault or justifies disabling signature checks, resetting the printer or updating firmware as a generic fix.
These are current official web-table and linked-FAQ observations, not an installer or physical-print test. No software was downloaded, licence accepted, queue added or network / USB / printer setting changed. The earlier Windows / Linux file versions, Mac section and model-specific hardware, six LCD groups and eight cause checks retain their earlier verification dates.
Mac driver downloads: full software, AirPrint and wireless setup
Checked 16 October 2026: the exact US HL-L2370DW(XL) macOS 26 list and macOS 27 list both show a full package alongside an AirPrint recommendation. These entries serve different purposes; match the Mac’s actual OS before selecting one.
| Entry | Observed information | Purpose / next check |
|---|---|---|
| Full Software Package | Version 1.0.0 details · 29 September 2026 · 246.56MB. Expanded Supported OS: 27.x, 26.x, 15.x; Compatible Model includes HL-L2370DW(XL). | A software bundle. Its title alone does not establish the internal components or a separate printer-driver DMG. |
| Printer Driver Information | The actual 26/27 lists recommend AirPrint; no version or file size is given for this entry. | Add the actual printer using the model-linked AirPrint instructions. |
| Wireless Setup Wizard | Listed under macOS 26:1.18.1 · 21 October 2020 · 2.04MB. | Sets the printer’s wireless network configuration; adding a Mac print queue is a separate task. |
Add the Mac printer queue with the documented route
- For macOS 13 or later, open Apple menu → System Settings → Printers & Scanners → Add Printer, Scanner, or Fax.
- Select the actual Brother printer, check the model name in Use, then Add. The 1 June 2023 FAQ separates the older System Preferences route.
- If printing still fails, compare the actual queue/connection with the printer’s Test Print. If only Mac jobs fail, review this model’s driver download guide and the selected OS. These comparisons are common diagnosis, not proof of a hardware or driver fault.
The27/26/15 values are the manufacturer’s Supported OS field, not an installation test of every Mac build. Intel, Apple Silicon, Rosetta and package signatures were not verified. HL-L2370DW remains print-only even when shared iPrint&Scan wording mentions scanning. Firmware is a separate category; no firmware update or licence acceptance was performed.
Connection and installation
- Check exact model, sales region, OS/CPU, rights and connection. Read safety instructions; remove packaging and prepare drum/toner, media and power. Preserve shared jobs, existing queues and defaults. Do not reset devices, update firmware routinely or weaken security.
- USB: use an A/B data cable no longer than 2m. Choose the genuinely compatible official package and connect at the time indicated by its real installer. Confirm the actual queue/USB port and test a small print; do not invent executable names or reuse another model's screens.
- Wired: use straight-through Cat5 or better on the printer LAN socket and an approved network reachable from the computer. Follow wired installation, compare discovered model and actual address, then test. Never copy example IP addresses or change shared addresses/defaults without authorization.
- WLAN: prepare authorized SSID/key. Official panel wizard: arrow keys, Network / WLAN(Wi-Fi) / Setup Wizard; enable WLAN, choose actual SSID, enter/apply key, confirm Connected. Install the compatible package on a computer able to reach that network. Panel wording can differ by region/manual version.
- macOS 13 or later AirPrint FAQ: Apple menu / System Settings / Printers and Scanners / Add Printer, Scanner or Fax; select the actual Brother, verify model in Use, then Add. Do not copy older System Preferences wording blindly. Linux: follow the actual compatible deb package instructions and real print system; no invented distribution commands.
Test Print and separate reports
Diagnostics checked 2026-10-14 against the US model’s mapped HTML guide E (25 January 2022). The existing software section was not freshly rechecked in this diagnostic update. No physical printing or installation was performed.
- Using ▲/▼, select Printer, then OK.
- For this HL-L2370DW, select Print Options, then OK.
- Select Test Print, then Go.
Official Test Print describes the device-only quality test. Compare it with computer output: the same defect on both points toward the printer/media/supplies; a clean device test narrows investigation to connection, queue, driver or application settings. This comparison is a diagnostic inference, not a guarantee.
Printer Settings: ▲/▼ → Print Reports → OK → Printer Settings → OK → Go. Settings report
Network Config: ▲/▼ → Print Reports → OK → Network Config → OK → Go. Inspect the actual address, subnet and node/MAC identity. If the address is 0.0.0.0, wait one minute and print again. Never copy the manual’s example IP. Network report
Wireless connection failed: three WLAN-report steps
The HL-L2370DW WLAN report describes wireless status. Distinguish it from the quality Test Print and address-oriented Network Config.
- Use ▲/▼ to choose Print Reports, then press OK.
- Select WLAN Report, then press OK.
- Press Go; read the connection result and any error code on the report.
Official PDF p.80: report printing
| Report | Check |
|---|---|
| WLAN | Checks wireless status and failure codes; it does not prove PC printing works. |
| Network Config | The existing address/subnet/device-identity report serves a different purpose. Existing reports |
| PC-only failure | Common check: compare connection, queue, OS and this model’s driver |
Six selected TS codes on the WLAN report
These are selected entries from the official table. Read the full printed code and consult the original for other entries.
| Code | Check |
|---|---|
| TS-01 | Check whether WLAN is disabled. Distinguish an intended wired connection before following the manual’s cable/WLAN change steps. |
| TS-02 | Router not detected: compare SSID, MAC filtering and credentials. Use a 2.4GHz SSID; a 5GHz-only SSID is unsupported. |
| TS-04 | Authentication/encryption mismatch: compare the approved setup with listed WPA2-Personal/AES. Do not treat open networking or WEP as a universal fix. |
| TS-05 | Compare SSID, network key and security details with the actual router. |
| TS-07 | WPS target not detected: if using WPS, follow both devices’ documented procedure. |
| TS-08 | Multiple active WPS targets: check that only the intended target is active, then retry later. |
HL-L2370DW complete official TS table · PDF pp.81–82
Checked 28 October 2026 using the model-named 235-page C PDF (printed pp.76–78) and the applicable E web code table. Use the official PDF if a web page denies access. Earlier driver, ARM, Mac, paper and drum verification scopes/dates remain; no physical report or router/security changes were performed.
Six selected LCD message groups
These are messages, not six invented numeric codes. “##” is the displayed suffix, not one universally decoded fault. Official full message table
| LCD message | Meaning | Next step |
|---|---|---|
| Manual Feed | Driver selected manual feed; slot is empty. | Check source selection; load the slot. |
| Media Mismatch | Driver and printer paper types differ. | Match loaded media and both settings. |
| 2-sided Disabled | Rear cover or duplex tray is not seated. | Close cover; seat duplex tray. |
| Jam 2-sided | Paper caught in duplex path or rear cover. | Use the cooled, illustrated jam route. |
| Drum ! | Corona wire or drum/toner assembly needs attention. | Inspect assembly and wire. |
| Print Unable ## | Mechanical fault; retain the displayed number. | Power off; wait minutes; retry. If recurring, contact Brother. |
Deep Sleep and automatic power-off are different states
Verified 19 October 2026: Deep Sleep and Auto Power Off only.
The exact-model row in the Version E guide says the LCD shows Deep Sleep and the printer wakes when it receives a job or someone presses a control-panel button. That display alone is not a driver-fault code. Auto Power Off is separate: after a model- and setting-dependent period in Deep Sleep, the printer may turn off, but the manual says it does not enter Power Off Mode while connected to a network. If fully powered off, turn it on before sending the job. For a network-connected printer that still fails to print, compare the actual LCD, connection, own Test Print and selected host queue instead of attributing the failure to normal auto-off. The guide does not establish this device’s current timer or guarantee every host job will succeed.
Exact-model Deep Sleep row · Auto Power Off and network exception
Compare device tests and reports · HL-L2370DW driver files for host-only failures
Slow printing on the HL-L2370DW: check Quiet Mode
Quiet Mode reduces printing noise and slows page output. Brother ships the HL-L2370DW with the setting off.
- Use ▲ or ▼ to select General Setup, then press OK.
- Select Ecology and press OK. Select Quiet Mode and press OK.
- Choose Off for the speed check and press Go. Choose On again if quieter operation matters more.
Repeat the same print job with the same paper. If only computer jobs are still slow, try the driver’s standard resolution instead of its highest setting. If the driver exposes Quiet Mode, check that setting too. Use the printer’s built-in Test Print to see whether the printer can produce a page without the computer. Review the HL-L2370DW driver and print queue if the problem occurs only on the computer.
Brother’s Quiet Mode instructions · Brother’s printing troubleshooting
Feeding problems: separator pad and two pickup rollers
No Paper T1 means the indicated tray failed to feed paper. First refill or remove and reload the paper, match the guides to its size, and avoid overfilling. For feeding problems, the manual gives this pad/roller cleaning procedure.
- Press and hold the power button to turn the printer off.
- Pull the paper tray completely out.
- Remove paper or anything stuck inside the tray.
- Soak a lint-free cloth in lukewarm water and wring it out tightly. Wipe dust from the separator pad on the paper tray.
- Wipe dust from the two pickup rollers inside the machine. Use the official illustration linked below to locate them.
- Reload the paper and put the tray firmly back in the machine.
- Press the power button to turn the printer on.
The tightly wrung lukewarm-water cloth is the specified method for this pad/roller procedure. General interior/exterior cleaning uses a dry lint-free cloth; Brother prohibits sprays, flammable substances and cleaners containing alcohol or ammonia. Avoid the toner/drum surfaces marked in the official illustrations.
Official pickup roller steps and location drawings · Official general cleaning warnings · No Paper T1 FAQ
| Case | Next check |
|---|---|
| No Paper T1 | First check the indicated tray, guides, reloading and overfilling. Official checks |
| Jam 2-sided | Use the existing duplex-jam location and cooling sequence. It is a separate procedure. Guide → |
| PC jobs only | Common host comparison: if device Test Print works, check the selected queue, connection and exact-model driver. Guide → |
Device Test Print · Drum / corona checks
Verified 22 October 2026 against the Version E online guide listing HL-L2370DW and the exact-model No Paper T1 FAQ. Earlier OS, ARM, Mac, sleep, drum and error evidence retains its dates and scope. No physical cleaning, printing or setting change was performed.
Jam 2-sided: ten cooling, removal and refitting steps
Use this sequence for a duplex-path jam shown on the LCD or Status Monitor. Wait until hot internal parts have cooled before touching them.
- Keep power on for ten minutes to cool the internals.
- Withdraw the front paper tray fully.
- Withdraw the rear duplex tray fully.
- Remove trapped paper from the machine or duplex tray.
- Check underneath for paper held by static electricity.
- If none is caught in the duplex tray, open the rear cover.
- Once cool, gently remove rear paper with both hands.
- Latch the rear cover closed.
- Refit the rear duplex tray firmly.
- Refit the front paper tray firmly.
This jam procedure starts with powered cooling. The earlier pickup-roller cleaning is a separate power-off task. Compare locations and directions with the official drawings.
Official duplex-jam drawings and full sequence
Three duplex messages and a PC-job comparison
| Message / case | Next check |
|---|---|
| Jam 2-sided | Paper is trapped in the duplex tray or rear path. Follow the cooling/removal steps above. Removal steps |
| 2-sided Disabled | Check that the rear cover is latched and the duplex tray fully seated. Official message table |
| Size Error DX | Match the loaded paper and machine/tray size setting; use a size supported for automatic duplex on the regional model. The guide also says hold Go about two seconds if required. Regional size conditions |
| PC jobs only | Common host check: if the device test works, compare the queue, connection and exact-model driver. Exact-model drivers |
Size Error DX concerns paper-size eligibility. Do not extend this US guide’s size list to other regional machines. Other Jam messages require their own location-specific procedure.
Official error and maintenance messages · Pickup-roller cleaning · Device Test Print
Verified 23 October 2026 using the US Version E HTML guide naming HL-L2370DW and its model-specific manual listing. Earlier driver, ARM, Mac, pickup and drum evidence retains its scope and dates.
Clear Jam Inside on the HL-L2370DW
When the display or Brother Status Monitor reports Jam Inside, check the paper path behind the front cover.
- Keep the printer on for 10 minutes so its fan can cool the internal parts. Let hot surfaces cool before touching them.
- Open the front cover and slide out the toner cartridge and drum as one assembly.
- Ease the jammed sheet out slowly. Refit the toner and drum assembly, then shut the front cover.
For Jam Rear, check behind the rear cover at the fuser. For Jam Tray 1, check the main paper tray. For Jam 2-sided, follow the duplex tray and rear path instructions.
After clearing the jam, run the printer’s built-in Test Print. If that prints and only computer jobs fail, check the selected print queue and paper settings, then see the HL-L2370DW driver guide.
Toner messages and Continue Mode
Use the message shown on the HL-L2370DW display or in Status Monitor to decide what to check.
- Toner Low / Prepare New Toner Cartridge. You can keep printing while the output looks acceptable. Have a replacement toner cartridge ready.
- Replace Toner. In the normal stop setting, printing pauses until you replace the toner cartridge. If you need to finish a job first, you can enable Continue Mode below.
- Toner Ended. The cartridge has reached the limit for printing in Continue Mode. Install a new toner cartridge.
- No Toner. Check how the toner cartridge and drum are fitted. Remove the assembly, reseat the toner in the drum, then reinstall the assembly. Brother advises replacing the cartridge if the message persists. Brother’s No Toner instructions
Print temporarily before replacing toner
On the printer, use the arrow keys and OK to open General Setup → Replace Toner. Select Continue and press Go. To restore the stop behavior, choose Stop from the same menu. Toner messages remain visible in Continue Mode and print quality may decline. Brother says installing a new cartridge turns Continue Mode off. Brother’s Continue Mode FAQ · User guide message table
If only computer jobs look faint and there is no toner message, compare them with the printer’s own Test Print. If that page looks normal, check the HL-L2370DW driver and Toner Save setting.
Drum ! and vertical stripes
Official corona-wire instructions: open the front cover and remove the toner/drum assembly. Gently slide the green tab across and back several times; return it to its Home position with the arrows aligned, then refit the assembly and close the cover. A tab left away from Home can cause a vertical stripe. Do not treat this as a drum-counter reset or clear a replacement counter without replacing the drum.
When toner rubs off the printed page
- Compare a device Test Print with a computer job. If only the computer job rubs off, start by matching Media Type to the actual paper. In the Brother Windows driver, select Improve Toner Fixing under Improve Print Output and test one sheet of the same stock. If the option is missing, check the current queue and the official HL-L2370DW driver guide.
- For ordinary paper, check the two green levers at the rear. Let the machine cool before opening the back cover. Following the illustration, raise both green levers as far as they go, then close the cover. Levers left in the envelope position can affect toner fixing on ordinary sheets. Lever illustration and fixing checks
- If Improve Toner Fixing is insufficient, Brother recommends trying a thick-paper setting under Media Type. For envelopes, use the manual slot one at a time and check Env. Thick. Raise the levers back to their original position after the envelope job. If toner still rubs off on the device Test Print, have a sample and the paper type ready when you contact Brother. Brother envelope feeding steps · Windows print settings
Drum ! and persistent black lines: compare the causes
Compare a device Test Print first. If lines also appear there, use the print-engine checks below. A Drum ! message and a black line are different observations; neither alone proves a PC driver fault. Test Print
| Symptom | Next check |
|---|---|
| Drum ! remains | After corona cleaning, check the toner/drum assembly is correctly seated. The exact FAQ directs drum replacement if the problem continues. |
| Black vertical lines | Return the green tab to Home. A damaged drum or toner cartridge is another possible cause; use the linked replacement instructions for the affected part. |
| Possible fuser contamination | The black-line FAQ refers this to the dealer or Brother service. Do not dismantle the fuser as a routine cleaning step. |
The shared black-line FAQ has an ADF scanner-glass step for models equipped with an ADF. HL-L2370DW is print-only, so that step does not apply to this printer. Use the corona procedure above; do not reset the drum counter merely to hide a warning.
Common PC check: if device printing is normal and only computer jobs fail, compare the selected queue and same-model driver.
Corona / Home · Drum ! FAQ · Black-line FAQ
Verified 20 October 2026: exact-model guide and FAQs. Earlier OS/package dates retain their scope; no physical print or replacement was performed.
When spots repeat about every 94 mm
Black or white spots about 94 mm apart can come from debris on the drum, such as label adhesive. Print the drum check sheet from the printer itself to find the column where the marks appear.
- With the printer in Ready, use the arrow buttons to find Print Reports and press OK. Select Drum Dot Print, then press Go.
- When the sheet prints, turn the printer off and use Brother’s illustrated removal steps to separate the toner cartridge and drum. Match the sheet’s column number to the numbered region beside the drum roller. A dot in column 2, for example, points to region 2.
- Turn the wheel at the end as shown to find the spot. Keep fingers off the drum surface. If you find debris, wipe just that spot gently with a dry cotton swab. Avoid liquids and sharp tools.
Lock the toner cartridge back into the drum, reinstall the assembly, and switch on to check again. If the printer’s own output still has the same dots, consult Brother’s guidance for a possibly damaged drum. If device output is clear and only computer jobs fail, check this model’s driver and print queue.
Reviewed 2026-11-13: HL-L2370DW print quality chart · drum check sheet and cleaning steps.
Persistent mechanical error
Record the exact LCD message and suffix, the connection and whether Test Print fails. If Print Unable returns after the documented restart, contact Brother for this model. Avoid factory resets, firmware changes or clearing unrelated print jobs as a general cure.
HL-L2370DW: eight cause checks
Model-specific device checks and clearly labeled common computer checks.
Pages coming out slowly? Check Quiet Mode and print resolution.
| Cause | Check | Help |
|---|---|---|
| Device or media | Compare independent Test Print first. | Device test |
| Manual feed / paper type | Inspect the exact LCD message and paper-source settings. | LCD checks |
| Driver / model / OS | Clean device test but failed PC output: verify exact model and package. | This model driver |
| USB detection | Check A/B data cable and actual USB queue; general PC checks. | USB help |
| Changed network address | Read current Network Config and compare the queue port. | Network report |
| Duplex path | Jam 2-sided or unseated rear tray/cover. | Model jam route |
| Stripe / Drum ! | Check green tab Home and assembly before blaming the driver. | Corona wire |
| Queue / application | Preserve other jobs; inspect first failure; common PC checks. | Queue help |
Official diagnostic sources
HL-L2370DW(XL) Manuals · HTML E / 2022-01-25 · 2026-10-14