Brother DCP-T520W Driver Download and Installation Guide

This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.

Model and driver source

This guide is for the color ink-tank print/copy/scan multifunction printer with hi-speed usb 2.0, wireless lan and wi-fi direct; do not import ethernet, fax, adf or automatic duplex features from other dcp-t/mfc-t models model Brother DCP-T520W. The download button opens the official Brother support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.

Operating-system and download checks

The Korean catalog lists these systems for checking: Actual Windows 11 and Windows 10 x64 results list Full Driver & Software Package G1, USB Printer/Scanner Driver J1 and print-only driver 1.10.0.0. G1 details explicitly list DCP-T520W and Windows 11/Windows 10 32-bit/64-bit. EasySetup 2.9.2.7 is initial setup, not the same package. Do not infer ARM or Server support from the menu. Official Mac product guidance uses AirPrint or Brother iPrint&Scan rather than a separate Mac print driver. Current Mac/Linux detailed downloads were inaccessible, so no exact current macOS, Apple Silicon or Linux package/version/install-command support is asserted.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.

Connection and installation

1. Confirm DCP-T520W, OS/architecture, administrator access, regional power rating, ink/paper/covers and saved queue settings. G1 notes require current firmware before driver installation; review the actual official update procedure and retain stable power/connection.
2. G1 instructions disconnect an already attached interface cable before installation. Extract the official package, select language and follow actual USB prompts. Choose the real DCP-T520W and USB port. Continue until installation completes before restarting, as the official guide specifies.
3. Distinguish print-only, USB print/scan J1 and full G1. Match media size/type, test printing and scanning separately. Remove only applicable Brother software through official procedures when necessary.
4. Wi-Fi setup records actual SSID/key, powers on, uses WiFi, Find Network, OK and WLAN Enable. Select actual SSID, enter key, apply/Yes and confirm Connected. Hidden SSID uses New SSID/Infrastructure with administrator-verified security. Install actual network printer after connection; Wi-Fi Direct is separate.
5. Do not apply Ethernet installation to this USB/wireless model. On a Mac, verify current OS/app compatibility before using the official AirPrint/app path; blocked current listings do not establish new OS support.
6. Windows protected print mode can block some manufacturer drivers/apps. Decide policy with the administrator before changing it. The official allowed-manufacturer-driver path checks Settings, Bluetooth & devices, Printers & scanners, Printer preferences and Turn off; Set up means already off. Keeping WPP requires checking actual compatible models for IPP basic printing or Print Support App, not assuming all DCP-T520W features.

Troubleshooting

USB discovery checks power, data cable, port and actual installer connection order. Wireless discovery checks Connected, SSID/key, network isolation and the printed wireless-report error code with the administrator. Missing printing checks real queue, paused jobs and paper/ink/cover messages. For scan-only failure check whether only the print driver was installed and select scanning software/device for the actual USB or wireless interface. USB J1 is not proof of configured network scanning. Do not delete all queues, reset networks or disable general security indiscriminately; record persistent errors for official support.

Frequently asked questions