This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download DocuPrint CP315 dw driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the a4 colour led print-only printer, originally fuji xerox; not cm315 z multifunction model Fujifilm Business Innovation DocuPrint CP315 dw. The download button opens the official Fujifilm Business Innovation support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Actual Recommended 64bit Windows Print Driver 6.7.9.1 (PCL, WHQL, Package Aware, Type3) Compatibility lists CP315 dw, Windows 10/11 64-bit and Server 2016/2019/2022/2025. OS menus do not prove actual file support. Verify separate packages for 32-bit, ARM, Mac or Linux and regional terms.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Check exact model/OS/CPU/rights/terms and preserve jobs/settings.
- Direct rear USB without hub, or approved Ethernet; connect before software installation. Follow compatible current PCL prompts, not a promise of old CD Quick Setup bundles.
- Attach wireless adapter powered off; disconnect Ethernet. Hold WPS until LCD prompt, start approved router WPS within two minutes; printer restarts. Then install on PC. Respect administrator/network policy.
- Match actual device/queue/port and test print.
Fujifilm Business Innovation DocuPrint CP315 dw not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |