The Pantum BP5100DW is a monochrome laser printer with automatic two-sided printing.
Download BP5100DW driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
Pantum lists USB, Ethernet and dual-band 2.4/5 GHz Wi-Fi for the BP5100DW. Use the button above to get the official Windows PCL 6 print driver package, version 1.0.6.
Operating-system and download checks
The linked ZIP contains x86 and x64 print components. Check your Windows version before installing. For other operating systems, search for BP5100DW in the Pantum support catalog.
Connection and installation
- Extract the confirmed ZIP and follow the installer prompts and licence terms.
- Choose a connection supported by the BP5100DW: USB, Ethernet and dual-band 2.4/5 GHz Wi-Fi. For network installation, verify the printer address and the print queue’s port.
- Print one test page. Then test automatic duplex with paper supported by the manual.
Pantum BP5100DW not printing: check possible causes
For Wi-Fi connection issues, use the network configuration page to check whether the printer is connected before changing the Windows queue.
For a duplex-unit jam, take the unit out at the back. If the sheet does not come out with the unit, check from below through the paper tray. Reinsert the unit, confirm all stuck paper is clear, then open and close the front cover.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |