This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download Aficio SG 3110SFNw driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Preserve queues, ports, media settings and other users' jobs; inspect only your own failed work.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the geljet colour inkjet mfp with print/copy/scan/fax. usb2, 10/100 ethernet and 2.4ghz ieee802.11b/g/n infrastructure wi-fi; ethernet and wi-fi cannot be used together. not sg3110dn or sg3100snw. model Ricoh Aficio SG 3110SFNw. The download button opens the official Ricoh support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Verified 8 October 2026: actual Windows10 64-bit list and expanded Windows11 64-bit file sections. PCL6/PCL5c v1.3.0.0 dated17 February2016. RPCS Raster v1.14.0.0 dated21 April2025 is listed in a separate Windows11 section expressly restricted to23H2 and earlier. Do not apply RPCS to newer Windows11 indiscriminately. Verified scope is Windows10/11 64-bit printing, not ARM/Mac/Linux/scanning/LAN-Fax. Check actual package, print language, CPU, terms and security history.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Confirm model, OS/CPU, rights, paper/ink and connection. Save documents and preserve queues/ports/settings. For RPCS Raster review Ricoh's model-listed CVE-2019-19363 security guidance: check release-history countermeasure or security-program conditions; a newer file alone does not prove no further action is needed.
- USB: keep printer power off until the actual installer asks. Cancel a premature hardware wizard. Use the PC-facing Type-B port under the ADF/port covers, attach both ends and close both covers. Follow official power prompts, then check exact model queue, real port and media; test print. Separate scan/fax software has separate compatibility.
- Ethernet: remove the internal wireless-LAN cable from the Ethernet board and store it in its holder before attaching Ethernet as shown in the manual. Connect approved network, close covers and verify actual IP. Choose real-IP discovery or Standard TCP/IP port, not example addresses or overwriting others' settings.
- Wireless conversion: reconnect internal wireless cable as instructed. Authorized administrator: User Tools / System Settings / Interface Settings / Network / LAN Type / IEEE802.11b/g/n, then power cycle as directed. Set approved SSID and compatible authentication/encryption under IEEE802.11 settings. Infrastructure only, no Ad hoc or simultaneous Ethernet. Do not weaken network security; consult the administrator about Ethernet if incompatible. Check real IP and queue/port.
Troubleshooting
No printing: power, panel and Status Monitor messages, exact queue/port/IP and driver version. Persistent USB detection failure: preserve model settings, then follow official model driver/device removal and USB reinstallation steps; do not remove unrelated devices or shared jobs. Wi-Fi: internal wireless cable, LAN Type, SSID, security compatibility and Ethernet exclusion. Persistent faults need exact messages for official service. Official guide: USB0070/0072, Ethernet0077, Wi-Fi0079/0080/0082, TCP/IP0089, USB error0375, printing error0381 and interfaces0455.
Frequently asked questions
Where should I download the driver?
Use the official manufacturer page linked in the download panel above.
Can I use a driver for a similar model?
Do not assume it is compatible. Confirm the full model number and package on the manufacturer’s page.