This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download SG 3110DN driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the aficio sg 3110dn desktop four-color piezo inkjet printer with automatic duplex, usb 2.0 and ethernet 10/100basetx; not a scanner/copier/fax and no wireless lan. sg 3110dnw is a different wireless model model Ricoh SG 3110DN. The download button opens the official Ricoh support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Actual RPCS Raster 1.15.0.0 files: Windows 11 x64, Windows 10 x64/x86, Windows Server 2025/2022/2019/2016 x64. Actual Mac RPCS Raster 4.4.10 file: macOS 15/14/13. PCL 6/5c packages have their own lists; Server 2025 is verified with RPCS only. No Windows ARM, Linux, newer macOS, AirPrint or scanner support is inferred.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Check the exact SG 3110DN label, OS/architecture, rights, saved jobs/queues, paper, cartridges and regional power rating. Do not use SG 3110DNw wireless instructions for this model.
- For Windows USB, start with the printer off, run the matching official package and choose the actual model and USB connection. Attach USB and switch on when prompted, finish and restart only if requested; print a test page.
- For wired LAN, connect Ethernet and confirm the real printer IP on the intended network. Choose LAN/port installation, discover the printer or search by its IP. If necessary, add a Standard TCP/IP port with the actual IP/hostname and select the installed SG 3110DN driver. Test the correct queue and paper settings.
- For Mac, install the actual supported DMG package following its prompts. Add the real network printer by IP using LPD and the installed Ricoh model software; the manual also documents HP Jetdirect Socket if LPD is slow. Old manual screenshots and the Mac1012 filename do not extend the current OS list.
Ricoh SG 3110DN not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |