This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download SP 4510DN driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the monochrome led print-only printer model Ricoh SP 4510DN. The download button opens the official Ricoh support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Windows 11 x64, Windows 10 (32/64-bit), Server 2016/2019/2022/2025 x64; macOS 13/14/15/26 listings, including PPD Installer 4.4.0.0 for macOS 26. Select the actual OS and architecture; x64 does not establish ARM support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Select the official SP 4510DN/4520DN download page and the exact OS package. These are separate models sharing a download page.
- Follow the official package instructions. The hardware guide connects USB with printer power off, using the rear USB Type B port and a suitable USB 2.0 cable no longer than 5 m.
- For Ethernet, configure DHCP or the administrator-assigned IP on the panel, print the configuration page, and match the driver port to that address.
- Wi-Fi requires the optional wireless LAN interface. Ethernet and wireless LAN cannot operate together. On SP 4510DN, use Menu, Host Interface, Network, LAN Type, Wireless LAN; use Wireless LAN Easy Setup for a supported WPS access point.
- Confirm installed options and actual paper settings, then test print. This device does not scan or copy.
Ricoh SP 4510DN not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |