Xerox Phaser 3330 Driver Download and Installation Guide

Use the manufacturer's support page to confirm the exact model and operating-system version before downloading.

This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.

Official manufacturer page

Download Phaser 3330 driver

ModelPhaser 3330
ManufacturerXerox
Product typeMonochrome laser printer
Operating systems to checkWindows 11; Windows 10 (32-bit/x64) for Smart Start; Windows 10/8/8.1 x64 and Server 2012/2012 R2/2016 x64 for the listed PCL6 V4 package
Before you install
  • Match the full model number on the device label, including suffixes.
  • Check your operating-system version and architecture on the official support page.
  • Cancel pending print jobs before replacing an existing driver.
  • Follow the manufacturer’s instructions for power, USB, and network connections.

Model and driver source

This guide is for the monochrome laser printer model Xerox Phaser 3330. The download button opens the official Xerox support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.

Operating-system and download checks

The Korean catalog lists these systems for checking: Windows 11; Windows 10 (32-bit/x64) for Smart Start; Windows 10/8/8.1 x64 and Server 2012/2012 R2/2016 x64 for the listed PCL6 V4 package. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.

Connection and installation

  1. Choose Phaser 3330 and the exact platform on the official download page. Check the selected package's supported products and systems.
  2. For USB, connect the A/B USB 2.0 cable. Cancel the Windows Found New Hardware wizard if it appears, then follow the official print-driver installation procedure.
  3. For Ethernet, connect the printer to the router or hub and check its IP address. The official installation guide directs Ethernet-only users to turn the printer's Wi-Fi off.
  4. For wireless setup, an administrator can use Menu, Tools, Setup, Network Settings, Wireless, Wi-Fi On, then WLAN Settings and Wizard. Select the SSID and enter its passphrase.
  5. Run the official installer, or use Windows Add Printer for the administrator V4 ZIP package. Confirm the detected model and port, and print a test page.

Xerox Phaser 3330 not printing: check possible causes

Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.

Possible causeFirst checksHelp
Device, paper or suppliesCheck the device display and supported self-test.Check steps
USB detection and cableCompare cable and port, then follow the model installation sequence.Check steps
Offline or network addressCheck the supported connection method and current address.Check steps
Print queue or spoolerCheck the first failed job and queue pause status.Check steps
Model, driver or OS mismatchIf the connection works but computer printing fails, match the model and OS.Open this model driver guide
Blank pages or quality settingsCompare device-only and computer output.Check steps

Find another model or symptom →