This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download SP C262SFNw driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the colour laser multifunction printer with printing/copying/scanning/fax and usb, ethernet and wi-fi. product discontinued for purchase, but model-specific drivers available. not sp c262dnw. model Ricoh SP C262SFNw. The download button opens the official Ricoh support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Verified 7 October 2026: Windows 10 64-bit main panel and expanded Windows 11 64-bit (keycode 122064) panel both contain Drivers and Utilities 1.13, 29 October 2022, 122648KB, and PCL6 1.03, 5 November 2018, 16441KB. Bundle lists Printer/TWAIN-WIA/LAN-Fax/Scan Utility/Smart Organizing Monitor, only supported model functions. PCL6 printing alone is not scanner installation. No inferred Mac/Linux/ARM/32-bit support from menus. Check actual CPU and current file requirements; legacy availability is not OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Verify exact model/Windows/CPU/admin rights and power/media/cables. Preserve queues/jobs/ports. Review terms yourself; no reset/default firmware update/warning bypass.
- Download compatible official package; Quick Install uses USB Connection or Network Connection. Follow actual wizard cable timing, approved real LAN/device and restart prompts after saving work. Verify queue/USB or network port and test, never use example IP.
- Panel Wi-Fi wizard requires prior driver installation and Ethernet disconnected. Coordinate approved transition before interrupting shared service. Setting / Network Settings / Wi-Fi Enable / Enable; authorized administrator enters requested password. Safely restart after jobs, wireless LAN icon / Setup Wizard, real approved SSID/key / Connect. Verify success; do not disable authentication.
Ricoh SP C262SFNw not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |