This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download QL-700 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the usb direct-thermal dk label/tape printer with automatic cutter; not ql-800/ql-810w, a scanner/copier/fax, ethernet, wi-fi or bluetooth printer model Brother QL-700. The download button opens the official Brother support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Actual QL-700 Printer Driver 6.5.0c (2025-02-18, 5.02 MB) explicitly supports Windows 11 and Windows 10 32/64-bit. Brother states no Windows ARM driver. The actual macOS 26 list instructs printing through App Store P-touch Editor without downloading/installing a separate printer driver. Other Mac/Linux packages and CPU/distribution conditions need individual verification; OS menu entries alone are not support proof. Legacy availability does not guarantee continued security/software updates.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Confirm exact QL-700 label, OS/architecture, administrator rights, saved queues/settings/jobs, regional power rating, USB data cable and correctly installed DK roll. Close the roll cover and keep the cutter/head clear.
- For the full P-touch Editor and printer-driver route, the official Quick Setup Guide requires holding the Editor Lite button until its lamp turns off before USB connection. Do not confuse the illuminated Lite mode with an installed full printer driver.
- Select the actual matching official Windows printer-driver file, extract it and execute its included installer; extraction alone does not install it. Follow the selected package prompts for USB timing. During discovery connect directly to the computer without a hub, then power on.
- Complete discovery of the real QL-700 and restart only if prompted. Confirm its queue, USB port and actual DK label size, optionally install the matching full P-touch Editor, and print a short test label.
- For verified macOS 26 follow the actual P-touch Editor listing and app requirements, not a Windows EXE, a fabricated Mac driver or the old Start Here Mac/Editor 5.0 CD screen. The guide says Editor Lite is not available for Macintosh. Do not apply SSID, WPS or Ethernet-IP installation to this USB-only printer.
Brother QL-700 not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |