This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download ET-4700 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Preserve working queues, ports, media and scan settings and other users' jobs; inspect only your own failed work.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the colour ink-tank inkjet multifunction device: print, copy, scan and fax; pc usb, ethernet and wi-fi. do not substitute another regional model or invent superiority comparisons. model Epson ET-4700. The download button opens the official Epson support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Verified 8 October 2026, actual US ET-4700 Windows 10 x64 list: Printer Driver2.100.00 (30 October 2025,32.6MB,ET4700_X64_2100_NA.exe), actual compatibility Windows11 and10/8.1/8/7/Vista64bit. Separate Scan2 6.5.23.0 (12 November 2020,60.6MB,ET4700_EScan2_65230_NA.exe) explicitly lists those Windows versions32/64bit. Scanner32bit compatibility does not extend to the print file; ARM/Server/Linux not inferred. Actual macOS26 selection: Print13.26 (24 October 2024,85MB,CISS2_1326_NA.dmg), separate Scan2 6.7.84 (18 September 2025,66.1MB). Both actual Mac details include26/15/14/13/12/11/10.15–10.12 and OSX10.11–10.6. Recheck CPU/conditions; legacy file availability is not OS security support. Firmware/Remote Print/mobile apps are separate.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Check exact label, OS/CPU/rights, power/ink/paper and cables. Preserve settings and jobs. For a new device finish initial ink charging before software; do not turn off, unplug, open covers or load paper during charging. Do not repeat initial charging on a working unit.
- Exact official ET-4700 support: choose actual OS and inspect each file's model/compatibility/licence. Official Start Here says start with PC USB disconnected; cancel Found New Hardware if shown. Run compatible setup, select Direct USB connection and connect the PC USB only when the installer requests it, not under a blanket after-completion rule. Do not confuse LAN or fax LINE. Verify exact queue/USB port/media and test print. Mac: open DMG and its installation icon. Install compatible Scan2 separately and select real ET-4700 to test saving.
- Ethernet: connect LAN to approved router/switch, place PC on a reachable same network, check real status/IP, choose Wired network connection and exact device. Verify actual queue/port and test. Never copy an example IP; changing from Wi-Fi to wired must preserve settings/jobs and follow approved model instructions.
- Wi-Fi: select Wireless connection. Panel path Home → arrows Wi-Fi Setup → OK → Wi-Fi(Recommended) → OK twice → Wi-Fi Setup Wizard → OK. Select approved actual SSID; Other SSIDs permits manual entry. Enter case-sensitive password and complete actual confirmation prompts. Router Wi-Fi needs a2.4GHz-capable network. Check current wired/wireless state, connection report and real IP. PC and printer must share a reachable network; verify exact queue and test. Network Scan2 needs its own actual model/address checks. Wi-Fi Direct differs from router Wi-Fi; do not weaken security or reset shared equipment.
Source: official ET-4700 User's Guide, ports, panel Wi-Fi, wired transition and troubleshooting; actual Start Here installation page visually checked.
Epson ET-4700 not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |