This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download ET-M1170 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Preserve working queues,ports,media settings and other users' jobs.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the monochrome ink-tank inkjet print-only printer, no copy/scan/fax. pc usb, ethernet and 2.4ghz wi-fi. model Epson ET-M1170. The download button opens the official Epson support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Verified 8 October 2026, actual Windows10 x64: Print 2.120.05 (2026-08-18,61.7MB,ETM1170_X64_212005_NA.exe) lists Windows11 and 10/8.1/7 x64 only. ARM description requires Windows11 24H2 or later. Do not infer Windows8/32-bit/Vista/Server from menus or old Combo. Actual Mac26: Print13.26 (2024-10-30,71.8MB,CISS_Mono_1326_NA.dmg) lists verified 26/15–11/10.15–10.12/OS X10.11–10.6. No scanner hardware/function is added by installing Scan2. Check actual OS/CPU/individual package; legacy availability is not OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Check exact model,OS/CPU/rights,power/ink/paper; preserve working queues,ports,media settings and jobs. Finish new-device initial charging, no power interruption; no repeat on working equipment.
- Exact ET-M1170 support: actual OS / GO / individual conditions/licence. Start Here begins PC USB disconnected. Cancel premature hardware wizard. Compatible Direct USB connection setup; attach only at actual prompt to rear PC USB, not LAN. Verify real queue/port/media/test. Mac compatible DMG and installer; no nonexistent scanner registration.
- Ethernet: rear LAN, approved network and actual Wired network connection prompts. Verify current IP against real queue port; no example IP or address overwrites.
- Wireless connection in compatible setup: actual approved SSID/key and screen prompts. Do not import ET-M2170 LCD menus. Network-status button prints connection report; holding at least five seconds prints network status sheet. 2.4GHz; router Wi-Fi differs from Wi-Fi Direct. Coordinate shared-network changes, check actual IP/queue and test.
Epson ET-M1170 not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |