Fujifilm Business Innovation Apeos 5570 Driver Download and Installation Guide

This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.

Model and driver source

This guide is for the a3 monochrome print/copy mfp with colour scanning. standard print usb3.0 and ethernet; wireless network kit and fax are optional. not apeos c5570 or apeosprint 3360 s. model Fujifilm Business Innovation Apeos 5570. The download button opens the official Fujifilm Business Innovation support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.

Operating-system and download checks

The Korean catalog lists these systems for checking: Verified 9 October 2026 on actual Singapore English driver list and PCL compatibility panel. WHQL PCL Type3 64bit Windows Print Driver7.1.18 expressly lists Apeos5570, Windows10/11 64-bit and Server2016/2019/2022/2025. Separate Easy Setup Installer1.0.19.1; its Windows10 32-bit scope does not apply to the64-bit PCL file. Menus do not prove Mac/Linux/ARM or separate scan-package support. Match purchase region, actual OS/CPU and each file.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.

Connection and installation

1. Check exact model, OS/CPU, rights, paper/toner and real options. Preserve queues/ports/authentication and shared jobs. Read official package terms yourself. Main Unit guide requires power off for USB/LAN cabling; coordinate safe shutdown. No reset, firmware change or security bypass.
2. Select a compatible official package and follow its actual prompts. PCL is standard; Adobe PostScript3 is optional. USB: rear print USB3.0 port8 in Main Unit p5, not peripheral USB2.0 port7 or front memory slot. Confirm exact queue and real USB port.
3. Ethernet: standard Network Port, approved network and real address from Device / Print Reports / Printer Reports / Configuration Report. Match discovered model/IP and actual port; never use example IPs. Match media/trays/finisher/duplex and required department authentication; test a small document. Printing installation is not separate scanning setup.
4. Wi-Fi only with the installed Wireless Network Kit. Authorized administrator: Device / Network Settings / Wireless LAN Settings / Common Settings / Enabled; confirm the instructed restart, then Wi-Fi Connection Settings. Use approved SSID and actual authentication; WPS only on a supported router. Preserve jobs before restart. IEEE802.1X requires appropriate certificates/authentication and encrypted HTTP for certificate import; do not disable security. Verify real IP/queue/port and test.

Troubleshooting

Not detected/no output: power, panel message, exact queue/port and cable; distinguish PC print USB from peripheral/memory ports. Compare network address with Configuration Report and approved PC network access. Missing wireless settings: check actual optional kit. PCL/PS, installed trays and authentication must match the hardware/policy. Paper jam: follow actual displayed location and Main Unit p26, check jam location before opening a tray, remove paper gently without touching internal parts, and follow its power instructions. Toner or persistent faults need the exact message and official service, not a blanket reinstall/reset. Preserve other users' jobs. Sources: Main Unit pp5–6/26/34; Operations pp3–9/41.

Frequently asked questions