Download Color LaserJet Pro MFP M180nw driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Official model facts checked: 2026-10-11
M180nw is the wireless T6B74A multifunction printer
The product-number table, printed page 2 confirms USB, Ethernet, Wi-Fi, Wi-Fi Direct and a two-line LCD. There is no fax or document feeder. The M180n T6B70A has an LED panel and no built-in wireless; its button instructions differ.
Choose the current M180nw software
The button above opens HP's exact M180nw download page. Select the actual OS version and architecture and check the package model. An old compatibility list does not guarantee a current installer. Print software, scanning components and firmware serve different purposes.
Compare device-only output before reinstalling
For this two-line panel, use Setup → Reports → Configuration Report (manual, printed page 95). If that fails, check the displayed message, paper and supplies first. If it prints but PC jobs fail, compare the listed IP with the computer's printer port.
Wi-Fi setup completed but printing fails
For wireless testing, disconnect Ethernet, confirm the wireless radio and compare the report's SSID with the PC network. If network access works but jobs fail, check the selected port and M180nw driver (printed pages 136–138). Use the LCD message and model manual for errors; M180n LED Er/Go instructions are a different panel.
HP Color LaserJet Pro MFP M180nw not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |