Product classification and listed files were checked against official Pantum pages on 31 October 2026. Use the exact model manual for physical controls and installation-mode instructions.
Download BP2300W driver
Check the listed files, versions and compatibility scope
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
Pantum BP2300W is a print-only monochrome laser printer with USB 2.0, 2.4GHz Wi-Fi and manual duplex, as listed in the official product specifications. The download button opens the exact-model manufacturer listing; package applicability still needs to match your computer.
BP2300W official files: Windows, Mac and Linux
Official listing checked on 31 October 2026 at 10:01 UTC. The applicable-model line includes BP2300W, BP2300NW and BP2309W. Select the file for the computer you use.
- Windows V1.1.4 — Listed size 44.66MB
- Mac V1.1.5 — Listed size 12.07MB
- Linux V1.1.167 — Listed size 8.32MB
These are listing versions and sizes, not installed-package or signature tests. The page does not establish Windows ARM64, Apple Silicon, newer macOS or newer Linux compatibility. Check the manufacturer’s exact OS/architecture notes before installing; a filename containing “Codesign” is not independent signature verification.
The official product page identifies a print-only monochrome laser printer with USB 2.0, 2.4GHz Wi-Fi and manual duplex. Shared package applicability does not add the NW model’s interfaces to BP2300W. Bluetooth is described as helping identify a nearby printer and connect through common Wi-Fi.
Open the exact-model official driver listing · Official BP2300W product specifications
Connection and installation
- Open the official support page and choose the matching model and operating system.
- Download the manufacturer-provided package and follow its installation prompts.
- Use USB or the supported Wi-Fi connection. Match USB cable timing to the selected installer mode and the exact model manual; do not assume one sequence applies to every setup method.
- After setup, check a short print job with the required settings. BP2300W is print-only; scan software is not part of this printer’s setup.
Pantum BP2300W not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Read the device indicators and use only a model-documented device check. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |