This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download P2200 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the a4 monochrome laser print-only printer; hi-speed usb 2.0, not p2200w wi-fi, ethernet, a scanner or copier model Pantum P2200. The download button opens the official Pantum support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Current P2200 specifications list Windows 7/8.1/10 (32/64-bit), Windows 11 x64, Mac OS 10.7 through 12, and Ubuntu 16.04/18.04/20.04/22.04 (32/64-bit). The model download list supplies Windows 2.6.46, Mac 1.11.19 and Linux 1.1.186. CP2200DW results are a different printer. Later macOS, ARM Windows and other Linux distributions are not established by these sources.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Confirm P2200, exact OS and architecture, administrator rights, USB data cable, toner, paper and removed packing materials. Save necessary queue settings and finish pending jobs.
- The official USB one-click procedure connects printer and PC by USB and switches both on before starting the installer; do not substitute a generic driver-first rule.
- Run the applicable official package, read the license/privacy prompts and select USB one-click installation. Mac uses Pantum Install Tool and local authentication when prompted.
- If one-click fails, use additional setup: on Windows choose the actual model and USB connection; on Mac choose the discovered USB printer and Install. Print a test page after installation.
- Linux users must follow the applicable Ubuntu package instructions; do not run a Windows executable or invented shell commands.
- Shared-manual Ethernet, Wi-Fi and AirPrint chapters include other models and do not establish P2200 support for those features.
Pantum P2200 not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |