This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download SP 220Nw driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the monochrome laser print-only printer with usb 2.0, 10base-t/100base-tx ethernet and wi-fi; not the usb-only sp 221 or an snw/sfnw multifunction model Ricoh SP 220Nw. The download button opens the official Ricoh support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: The exact SP 221/SP 220Nw/SP 221Nw/SP277NwX support page actually provides Drivers and Utilities 1.14 (25 October 2022, r97636L15.exe) in Windows 11 64-bit and Windows 10 32/64-bit views. Its package includes only functions supported by each model, so shared TWAIN/WIA/LAN-fax wording does not give this print-only printer scanning or fax. The macOS Tahoe 26 view currently provides DDST Printer Driver 1.02 (3 January 2021, r93226L15.dmg); verify its actual architecture and installation conditions before use. No ARM, Linux or Server compatibility is inferred. Read Ricoh's linked Windows security notice before installing and use the official regional package/terms.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Confirm exact SP 220Nw, OS/CPU, rights, power, toner, paper and data cable; preserve queues and approved network settings.
- USB: use the printer USB port, not Ethernet. Run the compatible official package and obey its actual connection requests; select the real USB device/port and print a test page. Do not assume old CD screens match today's package.
- Ethernet: connect the actual network port to the approved LAN, check the real device IP and select its network queue/port in the compatible installer. Confirm the computer and printer are on the intended network.
- Ricoh's model-specific Wi-Fi guide requires a USB cable and access point for Quick Install / Wireless Connection / Manually configure the printer network. Follow the wizard and reboot only when prompted. Before its WPS procedure, install the printer driver and disconnect Ethernet. Use the SP 220Nw instructions, not the SNw/SFNw LCD-button procedure, and an approved compatible router. Verify the actual network connection and test print.
Ricoh SP 220Nw not printing: check possible causes
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |