Star Micronics TSP743II Driver Download and Installation Guide

Use the manufacturer's support page to confirm the exact model and operating-system version before downloading.

This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.

Official manufacturer page

Download TSP743II driver

ModelTSP743II
ManufacturerStar Micronics
Product typeDirect thermal receipt/POS cutter printer in the TSP700II series, 203 dpi. USB, Ethernet, serial and Bluetooth are interface-specific configurations, not all standard on one unit. Check the actual rear interface; no scan/copy function. The official 2015 product sheet is used for model/interface identification, not current OS compatibility.
Operating systems to checkActual StarPRNT Intelligence Software Full 3.8.1, 251 MB, lists TSP700II and Windows 11 x64, Windows 10/8.1/7 32/64-bit. Includes print drivers, utility, OPOS, JavaPOS and manuals; Setup EXE omits manuals. Actual Mac CUPS 4.13.0, 928 KB, updated 14 April 2026, lists TSP700II and macOS 15/14/13/12/11, OS X 10.15/10.14. A separate JavaPOS OS list or generic macOS 27 help does not extend this CUPS file to 26/27. No ARM/Server/Linux distribution compatibility is inferred. Legacy availability is not OS security support.
Before you install
  • Match the full model number on the device label, including suffixes.
  • Check your operating-system version and architecture on the official support page.
  • Cancel pending print jobs before replacing an existing driver.
  • Follow the manufacturer’s instructions for power, USB, and network connections.

Model and driver source

This guide is for the direct thermal receipt/pos cutter printer in the tsp700ii series, 203 dpi. usb, ethernet, serial and bluetooth are interface-specific configurations, not all standard on one unit. check the actual rear interface; no scan/copy function. the official 2015 product sheet is used for model/interface identification, not current os compatibility. model Star Micronics TSP743II. The download button opens the official Star Micronics support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.

Operating-system and download checks

The Korean catalog lists these systems for checking: Actual StarPRNT Intelligence Software Full 3.8.1, 251 MB, lists TSP700II and Windows 11 x64, Windows 10/8.1/7 32/64-bit. Includes print drivers, utility, OPOS, JavaPOS and manuals; Setup EXE omits manuals. Actual Mac CUPS 4.13.0, 928 KB, updated 14 April 2026, lists TSP700II and macOS 15/14/13/12/11, OS X 10.15/10.14. A separate JavaPOS OS list or generic macOS 27 help does not extend this CUPS file to 26/27. No ARM/Server/Linux distribution compatibility is inferred. Legacy availability is not OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.

Connection and installation

  1. Confirm exact model, fitted interface, actual OS/CPU/rights, rated power and thermal roll. Preserve POS settings, queues/jobs and paper width. Review actual terms; no default firmware update, factory reset or blanket security disabling.
  2. Windows USB: keep disconnected until driver installation finishes. Extract Full and run setup, or use the official Setup EXE; follow Typical, Install, Finish. Power on and connect USB, then select the real automatically added queue under Printers and scanners and print a test page. Do not reinstall an already working driver unnecessarily.
  3. Ethernet: join the approved PC network, read the actual Current IP Parameters on the self-test. In Printer Utility Star PRNT choose model, Ethernet and Search Network, or the actual printer IP. Use Windows Printer Queue Management, Install Driver, Add and Test Print. Shared Wi-Fi headings do not prove built-in Wi-Fi.
  4. Bluetooth units only: after driver installation check self-test Bluetooth name and Auto-Connection OFF condition for Windows pairing. Coordinate changes to a shared device. Pair using the real PAIR indication and Windows device addition, find its actual COM port, then select Bluetooth and that port in Printer Utility and create/test the queue. Do not copy example COM3.
  5. Compatible Mac USB: defer connection until instructed, install the CUPS Driver-folder PKG, connect USB, verify the actual device under Printers and Scanners and test. Do not extend file support from newer generic screenshots.

Star Micronics TSP743II not printing: check possible causes

Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.

Possible causeFirst checksHelp
Device, paper or suppliesCheck the device display and supported self-test.Check steps
USB detection and cableCompare cable and port, then follow the model installation sequence.Check steps
Offline or network addressCheck the supported connection method and current address.Check steps
Print queue or spoolerCheck the first failed job and queue pause status.Check steps
Model, driver or OS mismatchIf the connection works but computer printing fails, match the model and OS.Open this model driver guide
Blank pages or quality settingsCompare device-only and computer output.Check steps

Find another model or symptom →