This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download WorkCentre 3345 driver
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Cancel pending print jobs before replacing an existing driver.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the black-and-white laser multifunction printer with print/copy/scan/fax, usb type b, gigabit ethernet and wi-fi; usb type a is for walk-up media, not the pc cable model Xerox WorkCentre 3345. The download button opens the official Xerox support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Actual Windows 11 and Windows 10 x64 filtered results include PostScript/PCL6 V4 administrator ZIPs 7.158.0.0 with WC3335_3345_x64 filenames. Smart Start 2.5.10.0 and Global Print Driver 5.1076.4.0 are different installer/universal-driver options. Actual macOS 15 results include Print Driver Installer 5.19.3_2562; Linux offers Office Standard Driver 5.20.661.4684 RPM/DEB i686/x86_64, subject to package dependencies and architecture. Do not infer ARM or every distribution. WC3345 Network/USB Scan Driver 3.32.06.01 is separately listed for Windows 10 x64 and requires firmware V60.001.14.000 (SMPR4) or later; it was absent from the Windows 11 result. Printing support does not establish scanning support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Check WorkCentre 3345, OS/architecture, permissions, regional mains rating, paper/toner/covers and needed queue/IP settings. Distinguish 3335 scanning files and Phaser 3330 print-only guidance.
- USB uses an A/B data cable. Cancel an unsolicited hardware wizard and follow the actual manufacturer package prompts. Extract the matching V4 administrator ZIP and register it through Windows Add Printer Wizard for the actual USB port and 3345; it is not the CD installer. Test printing.
- For Ethernet, power off before cabling to the configured network, power on and read the actual DHCP address from the configuration report. Add/discover that address rather than guessing an IP.
- For Wi-Fi, an administrator uses Machine Status / Network Settings / Network Connectivity / Wireless, chooses the actual SSID and enters its security passphrase. Record the confirmation IP, then install the network printer. Wi-Fi Direct is distinct.
- For macOS 15 use the official print installer, not a Windows EXE or TWAIN scan DMG. Linux requires the correct RPM/DEB and i686/x86_64 environment with reviewed dependencies. For Windows 10 x64 scanning, verify firmware first and use the separate WC3345 ZIP/setup.exe, then test scanning independently. USB alone does not enable email/network-folder destinations.
Troubleshooting
Check paper/toner, power, Job Status and the actual USB/Ethernet connection first. Slow output can reflect sleep recovery, special-media/quality settings or a complex job. Match application and driver tray choices; duplex requires supported media and settings, not envelopes or labels. Persistent system faults need Error History and Xerox service, not indiscriminate resets or deletion of unrelated queues.
Frequently asked questions
Where should I download the driver?
Use the official manufacturer page linked in the download panel above.
Can I use a driver for a similar model?
Do not assume it is compatible. Confirm the full model number and package on the manufacturer’s page.