This English quick guide is based on the Korean catalog. Confirm model-specific compatibility and installation details on the manufacturer’s official page.
Download TM-P80II driver
If the device label says Plus and the printer has an auto cutter, see the TM-P80II Plus driver and cutter troubleshooting guide.
- Match the full model number on the device label, including suffixes.
- Check your operating-system version and architecture on the official support page.
- Preserve working POS configuration, queues, ports, receipt settings and other users' jobs; inspect only your own failed work.
- Follow the manufacturer’s instructions for power, USB, and network connections.
Model and driver source
This guide is for the portable thermal receipt/pos printer with usb type-c; wi-fi+usb and bluetooth+usb configurations, not ethernet or a multifunction device model Epson TM-P80II. The download button opens the official Epson support page in this window. The manufacturer’s page is authoritative for the available driver packages and their current compatibility.
Operating-system and download checks
The Korean catalog lists these systems for checking: Verified 8 October 2026: the official US APD 6 v6.12 detail lists TM-P80II and Plus, released 7 May 2026, 45.2MB, APD_612_P80II_WM.exe. Compatible systems: Windows 11; Windows 10/8.1/8/7 32/64-bit; Server 2019/2016/2012 and Server 2008 32/64-bit. Select the actual OS and expand Drivers / Advanced Printer Driver details. A Server 2022, Mac or Linux menu does not establish APD compatibility. ARM and other systems need their own file requirements. OPOS/JavaPOS/ePOS SDK are separate POS-application choices. Legacy availability is not OS security support.. Select your exact operating system and version on the official page. If your version is not offered, do not install a package intended for a different system.
Connection and installation
- Verify model, OS/CPU, administrator rights and actual wireless configuration. Prepare battery, specified receipt roll and data-capable USB-C cable. Review terms yourself; preserve working settings. No default reset/firmware change or security-warning bypass.
- USB: connect cable, start host, then power printer. Follow current official APD prompts for TM-P80II, real port and receipt settings; test output.
- Wi-Fi model: USB-connected TM-P80II Utility / select printer / Network; Add Port if absent. Apply approved network settings, then power off. On restart verify real IP and PC network, and APD network port. Bluetooth model: use official TM Bluetooth Connector to search/connect actual device and assign its port. No Ethernet procedure. Match POS application's connection requirements and test.
Epson TM-P80II not printing: check possible causes
Use the self-test and interface status sheet separately
These steps follow Epson's technical guide for the standard TM-P80II. Use the auto-cutter guide for the TM-P80II Plus.
The self-test checks printing from the printer itself without a POS job.
- Load a roll, close the cover and switch the printer off. Hold Feed as you switch it on. Release Feed once printing starts.
- When the instructions print and the Power LED flashes, press Feed for less than one second to print the test pattern. The printer returns to normal mode after the completion message.
The interface status sheet shows the settings for the fitted Wi-Fi or Bluetooth interface. With the printer already on and ready, open the roll cover and load paper. Hold Feed for about one second until the buzzer sounds, release it and close the cover. On the printed Next Action guide, find the number beside the status sheet you want. Press Feed briefly that many times, then hold it for at least one second.
A Wi-Fi status sheet can wait until the active print connection ends. When Bluetooth security is Middle or High, an active Bluetooth connection can prevent the sheet from printing. Try again after the connection ends. Epson states that printing the sheet retains only the print settings of the main interface.
If the self-test prints but POS jobs fail, compare the address or device name on the sheet with the POS settings. For a Windows print queue, check the official TM-P80II driver and the port in use.
Epson self-test instructions · Status sheets and connection conditions
Features and interfaces vary by model. This is a general diagnostic sequence; confirm Wi-Fi, scanning, AirPrint and error-code instructions in the model manual.
| Possible cause | First checks | Help |
|---|---|---|
| Device, paper or supplies | Check the device display and supported self-test. | Check steps |
| USB detection and cable | Compare cable and port, then follow the model installation sequence. | Check steps |
| Offline or network address | Check the supported connection method and current address. | Check steps |
| Print queue or spooler | Check the first failed job and queue pause status. | Check steps |
| Model, driver or OS mismatch | If the connection works but computer printing fails, match the model and OS. | Open this model driver guide |
| Blank pages or quality settings | Compare device-only and computer output. | Check steps |